Before using your home theater, Disc playback – Samsung HT-TX55 User Manual
Page 13
ENG
OPERA
TION
25
Disc Playback
1
Press the
OPEN/CLOSE
button to open the disc tray.
2
Load a disc.
■
Place a disc gently into the tray with the disc’s label facing up.
3
Press the
DISC SKIP
button.
■
Rotate the carousel tray so you can load the third, fourth, and fifth discs.
4
Close the compartment by pressing the
OPEN/CLOSE
button again.
■
Playback starts automatically.
• Depending on the content of the disc, the initial screen may appear different.
•
Pirated discs will not run in this player because it violates the CSS (Content Scrambling System : a copy protection system)
recommendations.
To stop playback, press the
STOP
button during playback.
■
If pressed once,
If the
PLAY/PAUSE (
)
button or
ENTER
button is pressed, playback resumes from the stop position.
(This function works only with DVDs.)
■
If pressed twice, <
STOP
> is displayed, and if the
PLAY/PAUSE (
)
button is pressed, playback starts from
the beginning.
To temporarily pause playback, press the
PLAY/PAUSE
(
)
button during playback.
■
To resume playback, press the
PLAY/PAUSE (
)
button again.
To select a specific disc, press the corresponding the
DIRECT PLAY (1, 2, 3, 4, 5)
buttons on the front panel or the
DISC SKIP
button on the remote control, until
the required disc indicator flashes.
If the disc selected is not loaded, the next disc is played automatically.
Selecting a Disc in the Disc changer
24
Before Using Your Home Theater
To Operate your Samsung TV and the Home Theater with the HT-X50/HT-TX52/HT-TX55's Remote Control
1
Plug the main unit's power cord into the AC power supply.
■
Before plugging your system into a main socket, you must check the voltage setting
(OPTIONAL). If the voltage of the socket does not correspond to the setting on the rear of
the unit, you may seriously damage your system.
2
Press the
TV
button to set the remote to TV mode.
3
Press the
POWER
button to turn on your Samsung TV
with this remote.
4
Press the
TV/VIDEO
button to select VIDEO mode on your TV.
5
Press the
DVD RECEIVER
button to switch to DVD RECEIVER mode to
operate the DVD Home Theater
6
Press the
FUNCTION
button on the main unit or
DVD
button
on the remote to enable DVD/CD playback.
VIDEO
The DVD Home Theater's remote can be used to control Samsung TVs.
DVD
CD