Sony RDR-HX1010 User Manual
Page 88
88
b
Note
Depending on the disc, “4:3 Letter Box” may be selected
automatically instead of “4:3 Pan Scan” or vice versa.
HDMI Resolution
Selects the type of video signals output from the
HDMI OUT jack. When you select “Auto”
(default), the recorder outputs video signals of the
highest resolution acceptable for your TV. If the
picture is not clear, natural or to your satisfaction,
try another option that suits the disc and your TV/
projector, etc. For details, refer also to the
instruction manual supplied with the TV/
projector, etc.
b
Note
Even when a setting other than “Auto” is selected and the
connected TV cannot accept the resolution, the recorder
automatically adjusts the video signals that are suitable
for the TV.
Pause Mode (HDD/DVDs only)
Selects the picture quality in pause mode.
4:3 Output
This setting is effective only when you set “TV
Type” in “Video” to “16:9.”
Note that this setting is effective only for HDMI
connection or progressive signals output from the
COMPONENT VIDEO OUT jacks.
Component Out
Selects whether or not to output video signals
from the COMPONENT VIDEO OUT jacks.
b
Notes
• When you set “Line1 Output” to “RGB,” you cannot
set “Component Out” to “On.”
• When you connect the recorder to a monitor or
projector via only the COMPONENT VIDEO OUT
jacks, do not select “Off.” If you select “Off” in this
case, the picture may not appear.
Auto
Normally, select this.
1920×1080i
Sends 1920×1080i video signals.
1280×720p
Sends 1280×720p video signals.
720×480/
576p
Sends 720×480/576p video
signals.
Auto
The picture, including subjects
that move dynamically, is output
with no jitter. Normally select this
position.
Frame
The picture, including subjects
that do not move dynamically, is
output in high resolution.
16:9
4:3 Letter Box
4:3 Pan Scan
Full
Select this when you can change
the aspect ratio on your TV.
Normal
Select this when you cannot
change the aspect ratio on your
TV. Shows a 16:9 aspect ratio
signal with black bands on left and
right sides of the image.
On
Outputs the component video
signals. Select this when you want
to view progressive signals.
Off
Outputs no signals.
16:9 aspect ratio TV