Sony DRX-700UL User Manual

Page 12

Start your computer.

Connect the necessary cables, then turn on the drive.

• Connect the i.LINK cable to the 6-pin i.LINK connector on the drive.

−

For a computer's 4-pin i.LINK connector : connect to the 6-pin i.LINK
connector on the drive.

−

For a computer's 6-pin i.LINK connector : connect to the 4-pin i.LINK
connector on the drive.

• Connect the supplied AC power cord to the supplied AC adapter. Then

connect the AC adapter to the drive's DC IN jack, and connect the power cord
to the power outlet.

* If your drive equipped with an AC IN connector instead of a DC IN connector, connect the

provided AC power cord directly.

Hints

• The i.LINK cable may be connected to either of the two i.LINK connectors on the back

of the drive.

• For more information about the serial (daisy chain) connection of i.LINK devices, see

Power Switch

i.LINK Cable (6-pin)

AC adapter

AC power cord

i.LINK Cable (4-pin)

To AC power outlet

AC power cord