SMC Networks SMC7904WBRA - Manual (Page 90)

C
ONFIGURING THE
B
ARRICADE
4-46
Routing Table
Parameter Description
Flags
Indicates the route status:
C = Direct connection on the same subnet.
S = Static route.
R = RIP (Routing Information Protocol) assigned route.
I = ICMP (Internet Control Message Protocol) Redirect route.
Network
Address
Destination IP address.
Netmask The subnetwork associated with the destination.
This is a template that identifies the address bits in the destination
address used for routing to specific subnets. Each bit that corresponds
to a “1” is part of the subnet mask number; each bit that corresponds
to “0” is part of the host number.
Gateway The IP address of the router at the next hop to which frames are
forwarded.