Superior NMC004-TD - Manual (Page 11)

11
NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE.
Door Frame Kits - 4 piece (shown)
Brass Finish
99L62 DFK-4B
Brushed Stainless Finish 99L63 DFK-4BS
Door Frame Kits - 2 piece
Brass Finish
17M28 DTK-4B
Brushed Stainless Finish 17M29 DTK-BS
Door Frame Kits
Decorative door frame kits are available for use with
these appliances. The DFK (four- piece kit) is de-
signed to attach directly to the front face of the
appliance at its extreme edges; the DTK (two-piece
kit) at the front face's extreme top and bottom edges.
These kits provide a picture frame finish for the
appliance. The door frame kit can be retrofitted onto
previously installed appliances.
Louvers Kits
Decorative louvers are available for use with all
DT-400 and DR-400 Series direct vent lou-
vered-face appliances. These louvers are de-
signed to replace the standard black louvers
that are provided with the appliance. These
louver kits include six (6) finished louvers.
They can be retrofitted to previously installed
appliances.
Complete Louver Kits
Brass Finish
99L60 LK-4B
Brushed Stainless Finish 99L61 LK-4BS
Brass Finish Hood Kit 99L64 HK-4B
Brushed Stainless Finish Hood Kit 99L65 HK-4BS
Hood Kits
Attractive hoods are available in two styles to
be used on the DT-400 and DR-400 Series
appliances. These hoods are designed to be
fitted to the face of the appliance. In addition
to providing an aesthetically pleasing appear-
ance to your appliance installation, the hood
reduces heat effects to decorative mantles and
finish materials located above the fireplace
opening. The hood kit replaces the standard
hood that comes with these appliances and
snaps into place. These kits can be retrofitted
to previously installed appliances.
Radiant Panel Kit 99L58 CFPK-4
Forced Air Blower Kits
-Single Speed
80L84 FBK-100
-Variable Speed 80L85 FBK-200
-Unit Mountable 80L86 FBK-250
Forced Air Kit
The FBK-100 blower provides for a constant
velocity forced air circulation feature for your
appliance. The FBK-200 assembly with variable
speed wall switch provides a forced air circula-
tion feature for your appliance. The FBK-250
comes complete with a unit mountable switch
operating system.
Clean Face Panel Kits
Clean face panel kits are available to convert
the standard louvered appliances to clean face
models more suited for finishing around the
firebox opening with non-combustible materi-
als such as tile.
Square Log Rack 99L59 DLR-4
Decorative Log Rack
The decorative log rack provides the look of a
wrought iron log rack. The rack installs easily
in front of the log set with two screws. This kit
can be retrofitted to previously installed DT-
400 and DR-400 units.
Note: Some discoloration of the grate can be
expected with fireplace operation.
ACCESSORY COMPONENTS CONTINUED
Touch-Up Paint Kit (Black) 90L73 FTPK-B
Touch-Up Paint Kit (Tan) 98K67
Touch-Up Paint Kit
Repair of minor scratches and discoloration of
the appliance black painted surfaces may be
accomplished with the touch-up paint kit.
(FBK-200 Models Only)