Samsung BN68-01983A-00 - Manual (Page 24)

English -
Setting Up Anynet+
Press the TOOLS button to display the Tools menu. You can also display Anynet+ menu
by selecting Tools → Anynet+ (HDMI-CEC).
Setup
Anynet+ (HDMI-CEC) → Off / On
To use the Anynet+ Function, Anynet+ (HDMI-CEC) must be set to On.
When the Anynet+ (HDMI-CEC) function is disabled, all the Anynet+ related operations
are deactivated.
Auto Turn Off → No / Yes
Setting an Anynet+ Device to turn Off automatically when the TV is turned Off.
The active source on the TV remote must be set to TV to use the Anynet+ function.
If you set Auto Turn Off to Yes, connected external devices are also turned off when the
TV is turned off. If an external device is still recording, it may or may not turn off.
Searching Connections
Switching between Anynet+ Devices
. Press the TOOLS button.
Then press the ENTERE button to select Anynet+(HDMICEC).
. Press the ▲ or ▼ button to select Select Device, then press the ENTERE button.
. Press the ▲ or ▼ button to select to a particular device and press the ENTERE button. It is switched to the selected device.
. If you cannot find a device you want, press the ▲ or ▼ button to select Setup, then press the ENTERE button.
. Press the ▲ or ▼ button to select Searching Connections, then press the ENTERE button.
The message Configuring Anynet+ connection is displayed.
When searching devices completes, the connected devices are listed in the Anynet+ menu.
Switching to the selected devices may take up to 2 minutes. You cannot cancel the operation during the switching operation.
The time required to scan for devices is determined by the number of connected devices.
When the device scan is complete, the number of devices found are not displayed.
Although the TV automatically scans devices when it is turned on using the POWER button, devices connected when the TV
is on or under a specific circumstance are not displayed in the device list. Therefore select Searching Connections menu to
search devices.
If you have selected external input mode by pressing the SOURCE button, you cannot use the Anynet+ function. Make sure to
switch to an Anynet+ device by using the TOOLS button.
Anynet+ Menu
The Anynet+ menu changes depending on the type and status of the Anynet+ devices connected to the TV.
Anynet+ Menu Description
View TV Anynet+ mode changes to TV broadcast mode.
Select Device Shows the Anynet+ device list.
Menu on Device
Shows the connected device menus. E.g. If a DVD recorder is connected, the disc
menu of the DVD recorder will appear.
Device Operation
Shows the play menu of the connected device. E.g. If a DVD recorder is connected,
the play menu of the DVD recorder will appear.
Record
Starts recording immediately using the recorder. (This is only available for devices that
support the recording function.)
Receiver Sound is played through the receiver.
¦
T
❑
■
N
■
N
N
■
¦
N
N
N
N
N
Source List : TV 
Edit Name 
Anynet+(HDMI-CEC) 
U Move E Enter R Return
TV Input
View TV
Select Device 
Record 
Menu on Device 
Device Operation 
Receiver :Off 
Setup 
U Move E Enter
R Return
TV P
Anynet+ (HDMI-CEC) : Off
Auto Turn Off : Off
Searching Connections
Setup
U Move E Enter R Return
[530]BN68-01983A-00Eng.indb 22 2009-03-17 �� 5:36:27