Barcode reader – Sumo SL001 User Manual
Page 24

6.. .Pull.the.barcode.through.the.stand,.according.to.arrow.direc-
tion,.at.a.slow,.steady.rate,.taking.no.more.than.five.seconds..
The.robot.operates.silently.while.scanning.the.code.
7.. .When.the.upload.is.complete,.the.robot.sounds..If.a.sound.is.
not.heard,.the.upload.process.was.unsuccessful...
8.. .To.restart,.switch.the.robot.off,.then.on..Begin.the.upload..
process.again.
9.. .After.successful.upload,.trigger.the.new.stunts.using.remote.
control.ACTION.buttons.1,.2.and.3,.on.level.2.
Reset
When.using.the.Stunt.Action.software,.remote.control.ACTION.
buttons.1,.2.and.3.are.overwritten..To.restore.these.three.default.
stunts,.press.the.RESET ACTIONS.button.located.on.the.bottom.
of.the.robot.
Barcode Reader
24