Sony XAVW1 - Manual (Page 5)

5
Getting Started
Started
RCD-W1 (US) 4-233-692-12(1) Actual page number:
Unpacking
Check that you received the following items:
• Audio connecting cord (2)
• Remote commander (remote) (1)
• Size AA (R6) batteries (2).
Inserting batteries into the
remote
You can control the recorder using the supplied
remote.
Insert two size AA (R6) batteries by matching
the 3 and # ends on the batteries to the
markings inside the compartment. When using
the remote, point it at the remote sensor
on
the recorder.
Getting Started
Tip
With normal use, the batteries should last for about
six months. When the remote no longer operates the
recorder, replace all the batteries with new ones.
Notes
• Do not leave the remote near an extremely hot or
humid place.
• Do not drop any foreign object into the remote
casing, particularly when replacing the batteries.
• Do not expose the remote sensor to direct light from
the sun or lighting apparatus. Doing so may cause a
malfunction.
• If you don’t use the remote for an extended period
of time, remove the batteries to avoid possible
damage from battery leakage and corrosion.
TAPE/MD IN
Amplifier
CD IN
Hooking Up the System
Overview
This section describes how to hook up the CD
recorder to an amplifier. Be sure to turn off the
power of each component before making the
connections.
Use the audio connecting cord (supplied) (2).
When you turn off the Relay Play (page 13),
you can play both DECK A and DECK B (page
14 “Dual Play”), and you can output the sound
from CD OUT and CD-R OUT at the same
time.
The cord you need to hook up your
recorder
• Audio connecting cords (supplied) (2)
Red
(R)
White
(L)
White
(L)
Red
(R)
l l l l l : Signal flow
continued
RCD-W1
04GET_RCD-W1.p65 00.12.13, 10:32 AM 5