Sanyo CLT-A5822 - Manual (Page 22)

22
HEADSET JACK AND BELT CLIP
Headset connection (Headset not included)
For hands free conversation, connect the headset
(not included) to the HEADSET jack. The handset
earpiece and microphone are disabled when the
headset is connected. Press TALK to answer or
place a call while using the headset.
For purchasing, servicing or replacement please
contact our service center.
SANYO Canada Inc.
1-300 Applewood Cres.
Concord, Ont. L4K 5C7
(905) 760-9944
1-800-263-2244
www.sanyo.ca
Belt clip installation
• Attach the belt clip by inserting the sides of the
belt clip into the slots.
• Snap the ends of the belt clip into place.
The charge/in use & incoming call/in use indicator will change under the following
conditions.
CHARGE/IN USE LED on the base
LIGHT SIGNALS
INCOMING CALL/IN USE LED on the handset
Talking Lit steadily
Paging Flashes every 1 second
Low battery Flashes every 15 seconds
Incoming call Flashes in same pattern as telephone ring
Talking Lit steadily
Charging Lit steadily
Incoming call Flashes in same pattern as telephone ring
Paging Flashes every 0.5 second
Voice mail Flashes every 1 second
sy5822 10 april.p65 2006/5/12, ¤U¤И 02:52 22