Sanyo CE32LM5R - Manual (Page 11)

11
Common specification
Power source 100~240V 50Hz/ 60Hz
Colour system PAL NTSC3.58 ,SECAM
AV terminal
AV1: Scart CENELEC Standard
Input: Composite video, RGB (5V RGB with 5V sync to
pin 14) and audio-L/R
Output: Composite video, audio L/R
AV2: BNC
Input: RGB, H and V / Y, Pb, Pr and audio L/R
Output: RGB, H and V / Y, Pb, Pr
AV3: BNC
Input: Composite video
Output : Composite video
Audio In (DVI/AV2): Cinch L/R
Audio Monitor.Out: CINCH L/R
Audio Speaker out: 2 x 6W
DVI Input : DVI-D GROUP Standard
PC Input: Mini D-SUB 15 PIN and
Audio in 3.5mm jack
Contrast Ratio 1500:1
Screen(inches/ cm) 32” / 81 cm
(viewing measured
diagonally)
Display Native Resolution 1366 x 768 (WXGA)
Viewing angles H:176°, V:176°
Dimensions (WxHxDmm) 803 X 493 X 150
Weight (kg) 20.5
■ NO PICTURE, NO SOUND
● Check if monitor is plugged in.
● Check monitor is not in standby mode.
■ POOR PICTURE, SOUND OK
● Adjust BRIGHTNESS/ CONTRAST LEVELS (too low).
■ NO COLOUR, PICTURE OK
● Adjust COLOUR control.
● Check lead connections.
● Does the signal input have colour.
■ REMOTE CONTROL DOES NOT WORK
● Check batteries are inserted correctly.
● Check condition of batteries.
● Check to see if remote control inhibit is set ON.
■ PICTURE OK, NO SOUND
● Check external speakers are connected correctly.
● Check lead connections to external equipment.
● Volume turned down or mute selected.
SPECIFICA SPECIFICA TIONS / HELPFUL TIONS / HELPFUL HINTS HINTS GB GB
Specification
Helpful hints