Sanitaire 6000 - Manual (Page 4)

4
HOW TO REMOVE POLISHER FROM SHIPPING CRATE
1. Lift up on handle to
release lock.
2. Move upper handle forward to expose
wing nuts and angle bracket.
3. Remove the wing nuts
and bolts from both
upper and lower handle.
Discard the angle
bracket.
4. Lift upper handle and
place end-to-end against
lower handle, lining up the
holes for the bolts. Slide
handle sleeve downward
until all holes are lined up.
5. Use a screwdriver to line up
holes and guide bolts through
the handle.
6. Handle sleeve and bolts
will look like this when they
are properly installed.
7. Attach lock nuts on bolts and
fasten tightly.
8. Remove wing nuts and washers to
unfasten wood shipping retainer.
Discard wood shipping retainer.
9. Secure the handle release lock. Tip
the side of the carton where the
wheels are located on its side and
roll the machine out of the carton.