Sharp YO-P20 User Manual

Page 4

Be sure to perform the following operations before using the Organizer
for the first time.
1. Remove the isolating film that is

affixed to the battery holder on the
back of the unit.

2. Press the RESET switch with a stylus.

“RESET?” is displayed.

3. Tap f and press x to initialize

the Organizer.
After “RESET!” is displayed. You have
now cleared the memory contents.

The Select Language screen then appears.
Guidance messages can be displayed in 10
languages – English, Italian, German, French,
Spanish, Portuguese, Hungarian, Czech,
Polish, and Greek. After initializing the
Organizer, the default setting is English.
Select the desired language using > or
<, then press x.
Home clock is displayed. (See “Clock Mode”.)

NOTES
• If the Organizer is subject to strong, extraneous electrical noises or

shocks during use, an abnormal condition may occur in which no
keys (including

OFF

) will respond. Press the RESET switch, tap

f , then press x to delete all the memory contents.

• To minimize battery consumption, the Organizer is designed to

automatically turn off when no key has been pressed for approxi-
mately 5 minutes.

Using the Organizer for the First Time

Entering Characters

Touch Keyboard

Alphabet entry mode Number entry mode

• Each time f is tapped, the touch keyboard switches between the

Alphabet entry mode and the Number entry mode.
To tap the touch keys, use the attached stylus.

• Tap towards the center of each key.
• Numbers, alphanumeric letters, symbols, and “+ –

Ч ч .”

can be entered into the dot display area (the 1st line).

• Numbers and some characters (only space, –,

F, and P in Telephone mode) can be entered into the number display
area (the 2nd and the 3rd lines).

• Letters are entered in capital letters (“CAPS” is turned on). To enter

lowercase letters, tap

CAPS

to turn “CAPS” off.

Entering symbols and letters with an accent mark
• To enter a symbol, tap

SMBL

repeatedly until the desired symbol

appears:

@#$£¥

( )~’: / \_&<>ß!?¡¿æµ¢

< REVISED >

RESET

• The key touch tone is turned on and off by tapping h

select “KEY TONE?” using > or < , and press x.
Select on/off using > or < , then press x. When the
tone is activated, “

” will appear.

YO-P20(En).pm65

03.7.28, 3:28 PM