Stanton SMX-401 - Manual (Page 3)

When Stanton set out to
design its new SMX-401 3-
Channel DJ Mixer, compro-
mise was not an option. This
10" professional mixer
boasts a wide range of intu-
itive controls, superb sound,
and high-quality components
including a genuine Penny &
Giles crossfader.
Whether mixing house, tech-
no or trance from vinyl or
CDs, the SMX-401 has got
all the bases covered, thanks
to 3 phono inputs, 6 line inputs and 2 mic inputs with independent EQ.
Each channel sports gain control, bright input LED meters, a 3-band EQ
with full Kill capability, as well as Pan knobs. The SMX-401 also sports a
full-featured Cue section which includes PFL, Cue Pan, and dual head-
phone outputs for tag-team mixing.
Professional DJ’s will immediately appreciate the SMX-401‚s 3-band Kill
switches for channels 1 and 3, conveniently located right next to the
crossfader. For creative mixing, the SMX-401 also offers an Effects loop
with 1/4" Send and Return jacks. This mixer is rounded out with profes-
sional balanced Master outputs, separate Booth output, and a user-
replaceable fader design.
S M X - 4 0 1 F E A T U R E S
Line Inputs: 2 (RCA) x 3 channels, -10 dBV /10 kOhm
Phono Inputs 2 (RCA) x 3 channels, -50 dBV / 47 kOhm
Mic Inputs 1(1/4")/ 1 XLR -50 dBV /4.7 kOhm
Return Inputs 2 (1/4"), -10 dBV / 10 kOhm
Send Outputs 2 (1/4"), -10 dBV
Master Outputs 2 (1/4”) Balanced/ (RCA) unbalanced,
-2 dBu balanced / -10 dBV unbalanced
Record Outputs 2 (1/4”) Balanced/ (RCA) unbalanced,
-2 dBu balanced / -10 dBV unbalanced
Booth Outputs 2 (1/4”) balanced, -2 dBu / 100 Ohms
Headphone Output 1 (1/4 inch), 1 (1/8 inch)greater than 32 Ohm load
Dimensions (LxWxD) 15.3 in x 10.2 in x 4.3 in (39 cm x 26 cm x 11 cm)
Weight 7.7 lbs (3.5 kg )
Frequency Response 20 Hz to 20 kHz +/-1 dB (line)
Max Gain 12 dB
THD+N < 0.015 % at 1 kHz
Signal to Noise Ratio 110 dB (main signal path) (ref: max level)
Noise < -92 dBV (Line input to any output)
Channel EQ Hi +9, -45 dB, Kill: -45 dB
Mid +9, -35 dB, Kill: -35 dB
Low +9, -55 dB, Kill: -55 dB
Crosstalk < -90 dB at 1 kHz
Fader Kill < -90 dB (channel and crossfader)
T E C H N I C A L S P E C I F I C AT I O N S
The following user replaceable parts are available from your local
Stanton dealer.
LF401 Channel input fader
CF-PG401 Penny & Giles crossfader
PS-16US US Power Supply (110v)
PS-16EU European Power Supply (220v)
PS-16UK UK only Power Supply (240v)
R E P L A C E M E N T PA RT S