Sony 3-295-946-12(1) - Manual (Page 6)

6 GB
About the indicators on the display
L C R
SL SR SW
D.RANGE
RDS
ST MONO
MEMORY
S
DIGITAL
DTS
HDMI
PL
OPT COAX
2 1 3 4 5 6 7
8 9 q; qa qs qd qf
SLEEP
LFE
Name Function
A LFE Lights up when the disc being
played back contains an LFE
(Low Frequency Effect) channel
and the LFE channel signal is
actually being reproduced.
B SLEEP
Lights up when the sleep timer is
activated (page 60).
C Playback
channel
indicators
L
R
C
SL
SR
S
The letters (L, C, R, etc.) indicate
the channels being played back.
The boxes around the letters vary
to show how the receiver
downmixes the source sound.
Front Left
Front Right
Center (monaural)
Surround Left
Surround Right
Surround (monaural or the
surround components obtained
by Pro Logic processing)
Example:
Recording format (Front/
Surround): 3/2.1
Sound Field: A.F.D. AUTO
D ; DIGITAL Lights up when receiver is
decoding Dolby Digital signals.
Note
When playing a Dolby Digital
format disc, be sure that you
have made digital connections
and that IN MODE is set to
“AUTO”.
E HDMI Lights up when a playback
component is connected to this
receiver using a HDMI jack
(page 17).
L C R
SL SR SW
Name Function
F Preset
station
indicators
Lights up when using the
receiver to tune in radio stations
you have preset. For details on
presetting radio stations, see
page 48.
G D.RANGE
Lights up when dynamic range
compression is activated (page
34).
H Tuner
indicators
Lights up when using the
receiver to tune in radio stations
(page 47), etc.
I MEMORY Lights up when a memory
function, such as Preset Memory
(page 49), etc., is activated.
J COAX
Lights up when DVD input is
selected and the source signal is a
digital signal being input through the
COAX IN jack.
K OPT
Lights up when IN MODE is set to
“AUTO” and the source signal is a
digital signal being input through the
OPT IN jack.
L ;PL/
;PLII
“; PL” lights up when the
receiver applies Pro Logic
processing to 2 channel signals
in order to output the center and
surround channel signals.
“; PLII” lights up when the
Pro Logic II Movie/Music
decoder is activated.
M DTS Lights up when the receiver is
decoding DTS signals.
Note
When playing a DTS format
disc, be sure that you have made
digital connections and that IN
MODE is set to “AUTO”.
N SW Lights up when the audio signal
is output from the
SUBWOOFER jack.