Sony 3-295-946-12(1) - Manual (Page 22)

22 GB
5: Preparing the receiver
and the remote
Connect the AC power cord (mains lead) to a
wall outlet.
Before using the receiver for the first time,
initialize the receiver by performing the
following procedure. This procedure can also
be used to return settings you have made to
their factory defaults.
Be sure to use the buttons on the receiver for
this operation.
1
Press ?/1 to turn off the
receiver.
2
Hold down ?/1 for 5 seconds.
“CLEARING” appears on the display for
a while, then “CLEARED” appears.
All the settings you have changed or
adjusted are reset to the initial settings.
Connecting the AC power cord
(mains lead)
SUR L CENTER SUBWOOFER
AC power cord
(mains lead)
To the wall outlet
Performing initial setup
operations
DMPORT VIDEO 1 ACTIVE
STANDBY VIDEO 2 DVD SAT TV SA-CD/CD TUNER
MASTER VOLUME
AUTO CAL MIC
INPUT SELECTOR PRESET TUNING SOUND FIELD MUTING
BD
?/1
1,2