Installing the stand, Disconnecting the stand – Samsung 350 BN68 User Manual

Page 31

English - 29

Problem

Possible Solution

The picture appears distorted in the

corner of the screen.

Screen Fit is selected with some external devices, the picture may appear distorted in

the corner of the screen. This symptom is caused by the external devices, not TV.

The ‘Resets all settings to the

default values.’ message appears.

This appears when you press and hold the

ExIT button for a while. The product settings

are reset to the factory defaults.

This TFT LCD panel uses a panel consisting of sub pixels (3 133 440) which require sophisticated technology to produce.

However, there may be few bright or dark pixels on the screen. These pixels will have no impact on the performance of the

product.

Installing the Stand

1. Place the front of the TV onto a soft cloth or cushion on a table.

Align the TV bottom along the table edge.

2. Fasten screws at bottom of the stand.

Stand the product up and fasten the screws. If you fasten the screws with the LCD TV placed down, it may lean to one

side.

Disconnecting the Stand

1. Place the front of the TV onto a soft cloth or cushion on a table.

Align the TV bottom along the table edge.

2. Remove screws at bottom of the stand.

–

[NA]BN68-01975S-00L02.indb 29

2009-05-22 �� 3:04:15