Sterling Power Products Pearl - Manual (Page 26)

23 Iss 2
Crossing roads
Your scooter is not capable of
mounting and dismounting kerbs
and other obstacles. Always use
pedestrian crossings or drop
downs. Be aware that some drop
downs may be entrances to
driveways. Use caution if this is
the case.
Remember before crossing the
road, drive forwards and position
the scooter at 90° to the road.
Stopping about 30 - 60cm (1 - 2
feet), away from the edge of the
footpath. Check that it is clear to
cross. Select a medium to high
speed setting and when safe to do
so, drive across without stopping.
Note: Heavier users will
require higher speed settings.
Note: Low speed settings are
recommended when travelling
down hill, particularly in reverse.
Also, reduce your speed when
turning corners. The anti-tip
devices fitted to the scooter must
not be removed
Travelling across slopes
Care should be taken traversing
across a slope.
Note: Do not traverse across
the face of a slope in excess of
8°. Disregard of this advice
could result in your scooter
tipping.
Guidance for safe operation and use
Use on the footpath
When using your scooter on the
footpath always be aware of
pedestrians and situations which
might require extra care. For
example, young children and pets.
Remember, especially when driving
in public places, to drive with
caution and regard for others at all
times. When manoeuvring in
confined areas, including shops,
ensure the minimum speed is
selected. If you leave your scooter
outside a shop ensure that it does
not obstruct pedestrians or
vehicular access, and remember to
switch it off for safety.