Schneider Electric 107FB4/10 - Manual (Page 11)

7
Auto store
& Select Auto Store in the Install menu.
The autostore option label Start appears.
é Press the cursor right.
“ The progress of autoprogramming is displayed.
If a cable system or a TV channel which broadcasts
ACI (Automatic Channel Installation) is detected, a
programme list appears.Without ACI broadcast,
the channels are numbered according your
language and country selection.You can use the
Sort menu to renumber them.
It is possible that the cable company or the TV channel
displays a broadcast selection menu. Layout and items
are defined by the cable company or the TV channel.
Sorting TV channels
& Select Sort in the Install menu and press the
cursor right
é Select the TV channel you want to move using
the cursor up/down and press cursor right.
“ Select the new number and validate with the
cursor left.
‘ Repeat steps é and “ for each TV channel
you wish to renumber.
( To exit the menus, press the MENU key
repeatedly.
Manual store
Searching for and storing TV channels is done
channel by channel.You must go through every step
of the Manual Installation menu.
& Select Manual Store in the Install menu and
press the cursor right to enter.
é Select the TV system :
Select the country or part of the world from
where you want to receive the TV channel. If
you are connected to a cable system, select
your country or part of the world where you
are now located.
Note: for automatic detection select Europe (except
for France).
“ Search for a TV channel :
Press the cursor down to select Search and
press the cursor right to start searching.
Direct selection of a TV channel:
If you know the frequency, enter it directly with the
digit keys 0 to 9. Ask for a list from your cable
company or dealer, alternatively consult the Table of
frequencies on the inside backcover of this
handbook.
‘ Press the cursor down and enter the
programme number with the digit keys.
( Fine tune :
In case of poor reception, you can improve the
reception by adjusting the frequency with the
cursor left/right.
§ To store your TV channel, select Store and
press the cursor right. Repeat steps “ to (
to store another TV channel.
è To exit from the menu press the MENU key on
the remote control.
How to search for and store TV channels
Via the TV menu:
& Press the MENU key on the remote control.
é Use the cursor up/down to select Install .
“ Press the cursor right to enter the Install menu.
‘ Use the cursor left/right to select your language.
( Press the cursor down to select Country .
§ Use the cursor left/right to select your country.
Note: Select
“.....” when none of the countries applies.
TV Menu
Picture Language
Sound Country
Features Auto Store
Install π Manual Store
Mode Sort
Auto Store
Programmeπ ..........
TV π freq
o
p π
œ
Install
Language ....
Country 10 p
Auto Store 11
Manual Store 12 π
Sort π 13
Install
Language System
Country Search
Auto Store Program No
Manual Store π Fine tune
Sort Store
2328.1 gb 07-03-2005 09:26 Pagina 7