Sharp UX-P200 - Manual (Page 30)

Sending a Fax by Automatic Dialing
28
Sending a Fax by Automatic Dialing
You can store up to 30 fax or phone numbers in the machine for automatic
dialing.
♦
Auto-dial numbers are dialed by pressing until the desired number
appears in the display, and then .
Storing fax and phone numbers for automatic dialing
START/MEMORY
1
Press once and once.
2
Press once.
3
Enter the fax or voice number by pressing the number keys.
(Note: A space cannot be entered.)
•
To clear a mistake, press .
•
If a pause is required between any of the digits to access a special service
or an outside line, press . The pause appears as a hyphen (two
seconds per pause). Several pauses can be entered in a row.
4
Press
FUNCTION
SPEAKER
FUNCTION
START/MEMORY
5
When you hear the fax tone, press . Replace the handset if you
used it.
•
When transmission is completed, the fax will beep once.
START/MEMORY
Display:
ENTER FAX #