Shark EP733W - Manual (Page 3)

1. Cord Rewind Button
2. On/Off Button
3. Accessory Compartment Cover
4. Flexible Hose Inlet
5. Power Cord
6. Castors
7. Dust Bag Full Indicator
8. Dust Bag Compartment Release
Button
9. Carrying Handle
10. Parking Position Support
11. Hose Connecting Power Cord
Receptacle
12. Hose Connecting Power Cord
13. Hose Connector
14. Flexible Hose
15. Receptacle For Power Nozzle Power
Cord
16. Power Nozzle Power Cord
17. Power Nozzle
18. Power Nozzle On/Off Button
19. Head Light
20. Telescopic Tube
21. Parking Position Bracket
22. Floor To Carpet Brush
23. Air Driven Turbo Brush
24. Accessory Compartment
25. Upholstery Tool
26. Upholstery Brush
27. Crevice Tool
28. Paper Bags (X9)
ORDERING REPLACEMENT FILTERS & BAGS
TO ORDER REPLACEMENT FILTERS & BAGS
OR FOR TECHNICAL SUPPORT
FOR MODEL EP733W
Call: 1 (800) 798-7398
Monday to Friday 8:30 A.M. - 5:00 P.M. Eastern Standard Time
or visit our website: www.sharkvac.com
IMPORTANT: DO NOT ATTEMPT TO WASH or REUSE DUST BAGS.
Always replace with new dust bag to keep your unit in maximum working
condition.
Please Note:
The Pre-Motor Filter is washable. It should however be replaced every six
(6) months to ensure peak performance of your vacuum. Make sure that
the Pre-Filter is completely air-dried for 24 hours before inserting back in
the vacuum.
The HEPA-Type Post Motor filter is NOT washable. This must be replaced
every six (6) months, depending on the amount of usage.
GETTING TO KNOW YOUR CANISTER VACUUM
2
Illustrations may differ from actual product.
Technical Specifications
Main Unit: Voltage: 120V., 60Hz.
Power: 10.3 Amps
With Motorized Power Head: Voltage: 120V., 60 Hz.
Power: 12 Amps
9