Stanton RM.404 - Manual (Page 10)

Section F: Mic Controls (continued)
16. Mic-1 XLR Input: Primary connection for a standard balanced (XLR)
microphone.
17. Mic-1 1/4" Input: Primary connection for a standard unbalanced (1/4")
microphone.
18. Mic Level: Controls the output level (volume) of Microphone 1 only (both
connections.)
19. Mic EQ (HIGH): Controls High frequency equalization for BOTH micro-
phones (+10/-10 dB.) [Note: Any changes made to EQ settings will affect the
overall output level of the microphones.]
20. Mic EQ (MID): Controls Mid frequency equalization for BOTH micro-
phones (+10/-10 dB.) [Note: Any changes made to EQ settings will affect the
overall output level of the microphones.]
21. Mic EQ (LOW): Controls Low frequency equalization for BOTH micro-
phones (+10/-10 dB.) [Note: Any changes made to EQ settings will affect the
overall output level of the microphones.]
22. Mic Selector: Turns the mic(s) On or Off and activates the automatic
Talk-over circuit. When activated, the automatic talk-over circuit reduces the
music output allowing the mic to appear louder than the master audio signal.