Sunbeam IS6800 - Manual (Page 7)

5
Wash snow catcher in warm soapy water.
Wipe exterior of the Avalanche with a damp
soft cloth.
Disassembling your Avalanche
Your Avalanche comes apart for thorough
cleaning.
1. To remove snow catcher, grip sides and
slide out.
2. Remove the stainless steel shaving
blade by simply unscrewing the red nut
clockwise, see figure 3. When you have
finished cleaning, be sure to replace the
shaving blade back into position and screw
anti-clockwise to secure.
Note: Use caution when cleaning or removing
the blade as it is extremely sharp.
3. Raise the safety lid. With one hand press
and hold button at the back of the unit
whilst using the free hand to rotate the
ice-cube chamber anti-clockwise, see
figure 4.
Care and cleaning
Figure 4
Ice cube
chamber
Snow
catcher
Button
Figure 3