Sunbeam IS6800 - Manual (Page 6)

1. Clean all components prior to first use and
replace, (see Care and Cleaning).
2. Plug the unit into a 230-240V power
outlet and turn the power on.
3. Ensure the snow catcher is correctly
positioned in the Avalanche.
4. Raise the safety lid by lifting the flap,
see figure 1. The number of ice cubes will
vary depending on their size. As a guide,
add 6-8 ice cubes, or fill the chamber.
5. Lower the safety lid and press down. This
will activate the Avalanche and shaved ice
will dispense into the snow catcher,
see figure 2.
6. Once all the ice cubes have been shaved,
refrain from pressing safety lid, to turn the
Avalanche off.
Tip: Add your favourite cordial or juice to your
shaved ice to make a delicious ice treat.
4
Using your Avalanche
Figure 1 Figure 2