Sub-Zero CT30G - Manual (Page 15)

wolfappliance.com
Gas Cooktop Care 15
Care Recommendations
GENERAL CLEANING
Burner pan.
• Do not use abrasive cleaners; they will permanently
scratch porcelain enamel surfaces. Use a clean cloth
or sponge and wipe the surface with warm water and a
mild detergent. Rinse and dry immediately.
• Use a spray degreaser to remove fingerprints and
greasy spatters. Spray on a cloth and wipe the surface.
Buff dry immediately to avoid streaking. For hard water
stains, use white vinegar and water.
Burner grates.
• Remove burner grates and clean with a nonabrasive
cleaner such as liquid detergent and hot water, or a
paste of baking soda and water. Do not immerse in
water. Spray degreasers and mild abrasive cleaners
may be used.
Burner cap.
• Wash in warm water and liquid detergent or mild
abrasive cleaner. Rinse and dry.
• Never wipe a warm or hot porcelain surface with a
damp sponge; it may cause chipping or crazing (tiny
hairlike cracks).
Spark igniters.
• Keep dry; never spray water or cleaner directly on the
igniter. When cleaning surface burners, avoid contact
with the igniter.
Control knobs.
• To remove, slip the edge of a dish towel under the
knob; pull edges together. Using the towel for leverage,
lift up, pulling the knob off the valve stem.
• Wipe control knobs with a damp cloth and mild deter-
gent and water; rinse and dry. Do not soak the knobs
or use abrasive cleaners, they will scratch the finish
and remove markings.
Control panel.
• Use a spray degreaser to remove fingerprints and food
soils. Spray on a cloth and wipe the panel. Do not
spray directly on the panel around valve stems.