Stanton DJLab.2 - Manual (Page 6)

SPECIFICATIONS
M.201
INPUT / OUTPUT IMPEDANCE & SENSITIVITY:
LINE
-14dB/10K OHM ±2dB
PHONO -50dB /47K OHM ±2dB
MIC -60dB /2.2K OHM ±2dB
MASTER 1K OHM
PHONES 0dB/33 OHM
±2dB (LOAD=32 OHM)
MAX. OUTPUT (THD=1%)
MASTER MORE THAN +14dBV MAX
PHONES MORE THAN +21dBV MAX
CHANNEL BALANCE
WITHIN 3dB
FREQUENCY RESPONSE:
LINE
20-20KHz ±2dB
PHONO 20-20KHz +2, -3dB (RIAA)
MIC
20-20KHz +2/-3dB
OUTPUT NOISE (IEC-A WEIGHTED)
LINE
LESS THAN -90dBV
PHONO LESS THAN -80dBV
MIC LESS THAN -50dBV
THD + N: (MASTER 0dBV OUTPUT, MAXIMUM GAIN, w/ 20kHz LPF)
LINE
LESS THAN 0.05% 20 - 20KHz
PHONO LESS THAN 0.1% 20 - 20KHz (IEC-A WTD)
MIC
LESS THAN 0.2% 20 - 20KHz (IEC-A WTD)
PHONES LESS THAN 0.1% 20 - 20KHz (FROM LINE INPUT)
CROSSTALK LESS THAN -80dB AT 1KHz BETWEEN CHANNELS.
(TERMINATED UNUSED INPUTS)
MIC EQ
HI
±10 +/- 2dB AT 10KHz
LOW ±10 +/- 2dB AT 100Hz
CHANNEL EQ
HI
9 +/- 2dB AT 13KHz
-15 +/- 3dB AT 13KHz
MID 9 +/- 2dB AT 1KHz
LESS THAN -23dB AT 1KHz
LOW 9 +/- 2dB AT 70Hz
-26 +/- 3dB AT 70Hz
POWER SOURCE
AC 9V,1000mA
DIMENSIONS 230 (W) X 267 (D) X 111 (H) mm
WEIGHT 1.61Kgs