beautypg.com

Using the quick timer function, Checking status while recording, Press z rec repeatedly to set the duration – Sony RDR-GX380 User Manual

Page 42: Press display during recording

background image

42

To stop recording

Press x REC STOP. Note that it may take a few
seconds for recording to stop.

To pause recording

Press X PAUSE. To restart recording, press the
button again.

To watch another TV programme while
recording

If your TV is connected to the LINE 1-TV jack, set
your TV to the TV input using the TV/DVD
button and select the programme you want to
watch. If your TV is connected to the
COMPONENT VIDEO OUT jacks, set the TV to
TV input using the TV

t

button and select the

programme you want to watch (page 18).

z

Hint

If you do not want to watch TV while recording, you can
turn off the TV. When using a decoder, make sure to
leave it on.

b

Notes

• After pressing z REC, it may take a short while to start

recording.

• You cannot change the recording mode while

recording or during recording pause.

• If there is a power failure, the programme you are

recording may be erased.

• You cannot watch a PAY-TV/Canal Plus programme

while recording another PAY-TV/Canal Plus
programme.

You can set the recorder to record in 10-minute
increments.

Press z REC repeatedly to set the duration.

Recording starts after the first press. The Quick
Timer starts from the third press, and then each
additional press increases the recording time by 10
minutes within the available free space on the disc.

The remaining recording time appears
momentarily on the TV screen.
The time counter in the front panel display
decreases to 0:00 (or when the disc is full), then
the recorder stops recording (power turns off).

To check the Quick Timer

Press

z

REC once while recording. The

remaining recording time and other recording
information (programme position, recording
mode, etc.) appear momentarily on the TV screen.

To cancel or stop the Quick Timer

To return the recorder to normal recording mode,
press

z

REC repeatedly while recording.

[Continue] appears momentarily on the TV
screen.
To stop recording, press x REC STOP. Note that
it may take a few seconds for recording to stop.

To extend the Quick Timer

Press

z

REC repeatedly while recording. After

the recorder returns to normal recording mode, the
recording time extends by 10 minutes (up to the
capacity of the disc).

You can check recording information such as
recording time or recording mode, etc.

Press DISPLAY during recording.

Recording information appears on the TV screen.

A Recording mode
B Available recording time for the disc
C Recording status bar
D Audio channel
E Programme position or input source
F Current date/time
G Elapsed recording time

Press DISPLAY to turn off the display.

Using the Quick Timer function

10M

20M

30M

Continue

Checking status while recording

00:19:55

Continue

DVD

Remain 1H40M

Input : PR12

SP

MONO

19 : 20

12/10/2008