Sanyo DP47840 - Manual (Page 12)

12
Need help? www.sanyoctv.com 1-800-877-5032
This feature allows you to set a Current Time for your
HDTV and enable a Switch On Time for the HDTV to
turn on at a specific time of day.
When On Timer Function is set to ON, the TV will
automatically turn on at the previously set Switch on
Time.
Clock timer
This feature detects ambient room light brightness
and uses that reading to control the panel brightness
level and picture parameters to reduce the HDTV’s
power consumption.
NOTE: When room lighting is dark, the panel brightness
and/or the picture setting parameters such as bright-
ness and contrast are lowered. When room lighting is
bright, parameters are affected opposite.
Use the CURSOR
▲▼ keys to select On or OFF and
press ENTER.
Light sensor
ON-SCREEN MENU OPERATION
SETUP _________________________
CLOCK TIMER SCREEN
LIGHT SENSOR SCREEN
ENERGY SAVER SCREEN
Energy Saver settings control the LCD backlight
brightness to reduce power consumption.
• Level 1: Energy Saver feature is off.
• Level 2: Low power consumption.
• Level 3: Lowest power consumption.
Press ENTER on the desired level.
NOTE: ECO key may also be used as a shortcut to modify the
Energy Saver settings.
Energy Saver
AUTO SHUT-OFF SCREEN
When Auto Shut-off feature is set to ON, it will allow
the HDTV to automatically turn off when no video
and/or audio signals are being received.
NOTES: By factory default, this feature is set to ON.
TV will automatically turn off if no AV signals are
received in a time span of 15 minutes.
Use the CURSOR
▲▼ keys to select On or OFF and
press ENTER.
Auto Shut-off