Sangean DDR-22 - Manual (Page 25)

24
GB
Operating the radio – MW band
1. Press the Standby button to switch on the radio.
2. Press the band button to select MW band.
3. Press and release Tuning Control +/- button to tune to required
stations. Long press Tuning Control +/- button for more than
0.7 seconds, radio frequency will automatically increase/decrease
until next station of sufficient strength has been found.
4. Rotate the radio for best reception.
5. Adjust the volume control for comfort listening.
Presetting stations
There are 10 memory presets each waveband for this receiver.
DDR-22_381P101_GB.p65 2006/3/23, ¤W¤И 09:49 25