Sanyo DP19647 - Manual (Page 32)

32
MENU OPTION— ANALOG ANTENNA SIGNAL (Optional)
HELP HINTS (PROBLEMS/SOLUTIONS)
SYMPTOM CHECK THESE CONDITIONS TRY THESE SOLUTIONS
4 Use the CURSOR ▲▼ keys to choose Cable or
VHF/ UHF. Press ENTER.
Use this feature to switch between analog off-air
channels and analog cable channels.
1 Tune to an Analog Channel.
2 Press the MENU key to display the Main menu.
3
2 Use the CURSOR ▲▼ keys to highlight Analog
Antenna Signal. Press ENTER.
↕
Cannot select menu option,
ANALOG ANTENNA SIGNAL.
NO Cable channels above
number 13
NO UHF; VHF Channels OK.
● Did the word Not Available
appear on-screen?
● Cable Channel Indicator “C”
should appear next to channel
number.
● Cable Channel Indicator C should
not appear next to the channel
number.
● Press INPUT Key to select TV
Analog Channels.
● Switch Menu option–Analog
Antenna Signal selection to
CABLE.
● Switch Menu option–Analog
Antenna Signal to VHF/UHF.
If you continue to experience problems, please call toll free
1-800-877-5032. We can Help!