Sanyo SFA174F - Manual (Page 2)

VCC-ZM500P
Caution: Please consult the instruction manual to ensure safe and proper operation of the product.
EC00J0303 051
Distributed by:
SANYO Electric Co., Ltd.
Digital System Company
http://www.sanyosecurity.com
©2008 SANYO Printed in Japan 2008.5 MA
SFA174F
Model No.
Specifications
Dimensions
VCC-ZM500P
PAL standard 625 lines, 50 fields/sec.
1/4" (approx. 3.6 mm x 2.7 mm) interline transfer method CCD
Total: 795(H) x 596(V), Effective: 752(H) x 582(V)
540 TV lines (Typical)
0.32 lx (F1.4) at max. AGC gain, 0.01 lx (F1.4) at 32x electronic sensitivity boost
0.8 lx (F1.4) at max. AGC gain, 0.025 lx (F1.4) at 32x electronic sensitivity boost
AUTO (interlocked with auto iris), up to 32x / OFF
1.0 V (p-p) (75 Ω , composite)
More than 50 dB (AGC OFF)
Multi-spot evaluative metering (MULT), Centre-weighted average metering (CENT),
and Masking for backlight compensation (MASK)
ATW / AWC / Manual / Outdoor / Indoor / Fluorescent / R/B adjustment possible when using MWB
LOW, NORMAL, MIDDLE, HIGH, and OFF (Gain adjustable)
ON (individual setting possible) / OFF, Motion zoom function (individual setting possible)
ON / OFF, max. of 4 masked locations (Wide view screen)
High-speed mode:1/50, 1/120, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10000 sec. Low-speed
mode: 1/25, 1/12, 1/6, 1/3, 1/1.5
f = 3.5 to 105mm F1.4 to 3.7 auto focus
Internal sync. / Line lock
56 to 2.0 °
43 to 1.5 °
68 to 2.5 °
LINE PHASE
30x
16x
System connection terminals (RS485/Coaxial), support of camera control unit (VAC-70))
External inputs: 2, NO / NC switch, Day/night switch
External outputs: 1, NO / NC switch, open corrector
OFF / HV / H / V
Temperature: -10 ° C to 50 ° C [+14 ° F to 122 ° F], Humidity: within 35 to 90% RH
24 V AC ± 10%, 50 Hz or 12 V to 15 V DC
4.5 W
56(W) x 64(H) x 150(D) mm [2.2(W) x 2.5(H) x 5.9(D) in.]
540 g (19.0 oz.)
Scanning system
Image sensor
Picture elements
Horizontal resolution
Minimum illumination 20IRE
(approx.) 50IRE
Electronic sensitivity boost
Video output level
Video S/N ratio
Backlight compensation
White balance
Gain control
Motion detector
Privacy masking
Electronic shutter
Lens
Synchronizing system
Aperture Horizontal
Vertical
Diagonal
V phase adjustment
Optical zoom
Electronic zoom
Communication method
Alarm input
Alarm output
Mirroring function
Environmental conditions
Power requirement
Power consumption (approx.)
Dimensions (approx.)
Weight (approx.)
Unit: mm (inch)
Rear panel
1/4"-20UNC
147 (5.8)
10
(0.4) 3
(0.1)
11
56 (2.2)
64 (2.5)
Power indicator (POWER)
Video output connector
(BNC connector: VIDEO OUT)
Control terminals
System connection terminals
(RS485)
Power connection terminals
(AC 24V, DC 12V, GND) 1
2
3
4
5
2
1
3
5
4
NOTE: Appearance and specifications are subject to change without notice.
High Resolution of 540 TV Lines
(typical)
SANYO has improved the horizontal
resolution to 540 TV lines (typical) by
developing the full capability of CCD and
using an IR cut filter with enhanced
performance. The result is better picture
quality, which even a conventional high-
resolution camera cannot match.
32X Sensitivity Boost for Minimum
Illumination of 0.025 Lx (50 IRE)
While achieving 0.8 lx minimum subject
illumination at maximum gain, sensitivity
can be further heightened to 32X for 0.025
lx minimum illumination when the
sensitivity boost function is activated at 50
IRE (F1.4).
Built-in Intelligent Digital Motion
Detector and Zoom Detector
The Intelligent Digital Motion Detector
enables reliable and accurate motion
detection by analyzing the “magnitude of
movement” and the “size of object” from
changes in picture brightness. When a
moving object is detected, VCC-ZM500P
can send an alarm signal to external units
and/or automatically switch to the optical
zoom mode, according to the user's
preference. Furthermore, an external
alarm input terminal makes it possible,
when an alarm signal is received, to
automatically zoom in to the site of
activity, according to a preset zooming
operation.
Registering a view setting file
(CAMERA VIEW)
To support shooting in various surveillance
conditions like when the surveillance
location is bright (or dark), the CAMERA
VIEW screen allows you to register up to
2 patterns of shooting settings as camera
view setting files. Of course, camera view
switching in connection with external
alarms or motion sensors is also possible.
Main Features
Other useful features
• 3 Methods of intelligent backlight compensation
• 13 electronic shutter speed modes
• Privacy masking
• Adjustable gamma correction and aperture
settings
• Display of assignable camera ID and titles
(16 characters max.)
• Mirror function
Digital System Company of SANYO Electric Co., Ltd. obtained
Quality Management System ISO 9001 and Environmental
Management System ISO 14001 certifications.
Coaxial control or RS-485
Communication protocol:
Coaxial control: SSP / H-SSP / PELCO-C
RS485: SSP / H-SSP / PELCO-D