SBC comm SBC-116 - Manual (Page 14)

AREA CODE SETTING
When you use this phone for the first time, or move to an area that has a different
area code, you must enter your area code. This is necessary because the phone
must distinguish local or long distance calls to properly dial calls from the Caller ID
list and phone book.
1. Press the MENU button, using the or scroll to SET AREA CODE - press
ENTER button.
2 LCD will Display “SET AREA CODE”.
3. Using the keypad dial buttons, enter your area code. Press
* to move the
cursor or press # to delete.
4. When the three-digit area code setting has been completed (for example: if
your area code is 858 the display will show ‘858’) then press ENTER
5. Phone will return to main menu
LANGUAGE SELECTION
The phone supports multiple languages. Press the MENU button, using the or
scroll to SET LANGUAGE - press ENTER to enter the language setting, then press
the or button to select the language. Press the ENTER button to confirm and
exit.
TIME SETTING
If you have subscribed to Caller ID, the date and time will be automatically set when the
first call is received. To set the time manually follow the instructions below:
Press the MENU button, using the or scroll to SET TIME - press ENTER, then using the
keypad, enter the correct time, date and day of week. Press the MENU button to exit.
The setting sequence is hours - minutes - month - date - year - day of week.
After the year setting, the cursor for day of week will flash, you can use the or button
to activate/deactivate this setting. If the flashing cursor is active, the day of week will set
automatically, or if deactivated, the LCD will only show the “TOTAL CALLS XX” in the
standby state.
LCD CONTRAST SETTING
The phone features an LCD contrast control which can be adjusted for optimum viewing
depending on phone angle and lighting. To change, press the MENU button, using the
or scroll to LCD CONTRAST - press ENTER. The LCD shows “SET CONTRAST XX”.
Press the or button to select the LCD contrast (up to 16 levels for choosing), press the
ENTER button to confirm.
BACK LIGHT/OFF HOOK LIGHT SETTING
Press the MENU button, using the or scroll to BACK LIGHT - press ENTER. Press the
or button to select either BACK LIGHT TIME or OFF HOOK LIGHT.
To adjust BACK LIGHT time: The phone features a backlight LCD that is illuminated
whenever you touch a key or remove the handset. When the LCD shows “BACK LIGHT
TIME”. Press ENTER and then the or button to select the time you would like the
BACK LIGHT to remain illuminated, or select BACK LIGHT OFF if you do not want the LCD
to illuminate. Press the ENTER button to confirm.
Function Operations