Samsung VP-D451 - Manual (Page 111)

✤ At the end of a recording you must remove the
power source.
✤ When recording with a Lithium ion Battery pack,
leaving the pack on the Camcorder can reduce the
life span of the battery. The Battery pack should be
released after recording is completed.
1. Slide the TAPE EJECT switch in the direction of
the arrow.
■ Opening the cassette door ejects the tape
automatically.
■ Please wait until the tape is completely ejected.
2. After removing the tape, close the door and store
the Camcorder in a dust free environment.
Dust and other foreign materials can cause
square-shaped noise or unstable images.
3. Set the Power switch to the OFF.
4. Disconnect the power source or remove the Lithium
ion Battery pack.
Slide the BATT. RELEASE switch located on the
bottom of the Camcorder and slide the Battery pack
in the direction of the arrow.
After Finishing a Recording
Maintenance
ENGLISH
111 111
✤
✤
1. TAPE EJECT
■
■
2.
3.
4.
BATT. RELEASE
1
2
3
4