Sanyo VMC-L2019 - Manual (Page 8)

7 English
OSD Menu Configurations
No Signal Display
When there is no connection to the VGA and Video
input, the On Screen Display will show this message.
No Signal
Check signal cable.
VGA
OSD Menu Selection
1. Press the MENU button to see the main menu.
2. Press /
and ENTER button to select the main
menu.
3. Press / and ENTER (or ) button to select the
sub menu.
4. Press / and ENTER (or ) button to select
setting. (Or press / button to select setting)
5. Press the MENU or button repeatedly to exit.
NOTE1: Press the MENU or button to return to
the previous screen.
NOTE2: The OSD display will be disappear after 2
minutes if there is no button input.
Video mode
Input Menu
Input
Source List : Video A
PIP
Edit Name
Move Enter Exit
Source List
Source List
Move Enter Return
Video A : - - - -
Video B : - - - -
S-Video : - - - -
VGA : - - - -
1. Press the MENU and ENTER button.
2. Press the ENTER or button and then
/
button to select the Video A, Video B or S-Video.
3. Press the ENTER or button to save the setting
and exit.
PIP
“PIP” is available in VGA mode.
See “
PIP (Picture In Picture)” on page 11.
Edit Name
Edit Name
Move Enter Return
Video A : Cable STB
Video B : - - - -
S-Video : DVD Receive
VGA : VGA
Edit Name
Move Enter Return
- - - -
CAMERA
DVR
VCR
DVD
Cable STB
AV Receiver
DVD Receiver
1. Press the MENU and ENTER button.
2. Press the /
and ENTER button to select the
Edit Name menu.
3. Press the / and ENTER button to select input.
4. Press the / and ENTER button to select the name.
5. Press the MENU or button repeatedly to exit.
P7
P8
P9
P10