Sony 40GB Playstation 3 CECHH01-1.90 - Manual (Page 6)

6
Getting started
Setting up the PS3™ system
02
Step 1: Connect to a TV
Video output on the PS3™ system
The PS3™ system can output two types of resolution: HD and SD. Refer to the instruction manual
for the TV in use to check which video mode is supported.
* 1 This number indicates the number of scan lines. Note that "i" stands for "interlace" and "p" stands for
"progressive". Using progressive results in high-quality video with minimal fl ickering.
* 2 The video output setting on the system will display as "Standard (NTSC)".
HD (High Defi nition) SD (Standard Defi nition)
Video mode * 1 1080p 1080i 720p 480p 480i * 2
Aspect ratio 16:9 16:9 16:9
16:9
4:3 16:9
4:3
Screens showing the difference in resolution
HD screen SD screen
Procedure fl ow for setting up the
system
m
Step 3: Connect an Ethernet
cable. Page 10
Step 4: Connect the AC power
cord. Page 11
m
m
m
Step 2: Connect digital audio
devices. Page 9
Step 5: Perform initial setup of
the system software.
Page 11
Step 1: Connect to a TV.
Page 6