Star Micronics PCI/ISA System Board D6-IN - Manual (Page 15)

D6-IN System Board Manual 13
Chapter 2: Configuring the D6-IN
Jumper Settings
This section gives you the jumper settings used for the D6-IN system
board.
Table 2-1: Jumper settings to select the speed of the CPU.
Table 2-2: Jumper settings to reset the real-time clock.
CPU
Speed
W1 W2 W3 W4 W5 W6
150 MHz 60 x 2.5 Open Close Close Close Close Open
166 MHz 66 x 2.5 Open Close Close Close Open Close
180 MHz 60 x 3.0 Close Open Close Close Close Open
200 MHz 66 x 3.0 Close Open Close Close Open Close
Table 2-1: CPU Speed Selection
Jumper Function Settings
W7 Normal
Clear CMOS 1-2
2-3
Table 2-2: Real-time Clock Selection