Sony SLV-ED10MJ - Manual (Page 23)

Basic Operations
23 Basic Operations
5
Press r REC to start recording.
The recording indicator lights up red in the display window.
To stop recording
Press p STOP.
To check the remaining tape length
Press DISPLAY. The white bar indicates the approximate length of tape
remaining.
Remaining tape length
Time counter
To watch another TV programme while recording
1
If the TV is connected to the VCR using an audio/video cable, set the
TV to TV input. If the TV is connected to the VCR using only the aerial
cable, skip this step.
2
Select another programme position on the TV.
To save a recording
To prevent accidental erasure, break off the safety
tab as illustrated. To record on a tape again, cover
the tab hole with adhesive tape.
Safety tab
Recording indicator
continued
REC
LP APC
S E
: : 2 2
–
0 0 0