Sony CMT-L1 - Manual (Page 19)

19 GB
Timer
7
Press . or > on the remote
repeatedly until the music source you
want appears.
The display changes as follows:
TUNER y CD PLAY
8
Press ENTER/YES on the remote.
The starting time, the stopping time, the
music source, and the volume appear in
turn, then the original display returns.
9
Press @ / 1 to turn off the system.
To
Check the settings/
activate the timer
Change the setting
Turn off the timer
Notes
• The system will turn on 30 seconds before the
specified starting time. Do not operate the system
from the time the system turns on until the Daily
Timer starts. Otherwise the timer will not be
activated correctly.
• When you use the Daily Timer at the same time as
the Sleep Timer, the Sleep Timer setting has
priority.
• You cannot use the optional components connected
to MD/TAPE IN jack as the sound source for Daily
Timer.
Waking up to music
— Daily Timer
By setting the Daily Timer, you can make the
system automatically turn on and off at
specified times. To use this function, make
sure that you have set the system clock
correctly (see “Setting the clock” on page 10).
1
Prepare the music source you want to
listen to when the system turns on.
• CD: Load a CD. To start playing from a
specific track, make a program (see
“Programing the CD tracks” on page 12).
• Radio: Tune in the preset radio station
that you want (see “Listening to the radio”
on page 16).
2
Press VOL + or – repeatedly to adjust
the volume.
3
Press CLOCK/TIMER SET on the
remote.
4
Press . or > on the remote
repeatedly until “DAILY SET?” appears,
and then press ENTER/YES on the
remote.
The hour indication flashes.
5
Set the starting time.
Press . or > on the remote repeatedly
to set the hour, and then press ENTER/YES
on the remote.
The minute indication begins flashing next.
Press . or > on the remote repeatedly
to set the minute, and then press ENTER/
YES on the remote.
The hour indication flashes again.
6
Set the stopping time by repeating step
5.
Sound Adjustment/Timer
Do this
Press CLOCK/TIMER
SELECT on the remote and
press . or > on the
remote repeatedly until
“DAILY SELECT?” appears,
and then press ENTER/YES on
the remote.
Start over from step 1.
Press CLOCK/TIMER
SELECT on the remote and
press . or > on the
remote repeatedly until
“TIMER OFF?” appears, and
then press ENTER/YES on the
remote.