Setting up the remote commander, Step 2, Inserting the batteries – Sony SLV-E180EG User Manual
Page 6: Using the remote commander
Getting Started
5
Getting Started
Step 2
Setting up the remote commander
Inserting the batteries
Insert two R6 (size AA) batteries by
matching the + and – on the batteries to
the diagram inside the battery
compartment.
Insert the negative (–) end first, then
push in and down until the positive (+)
end clicks into the position.
Using the remote commander
You can use this remote
commander to operate this
VCR and a Sony TV. Buttons on
the remote commander marked
with a dot (•) can be used to
operate your Sony TV.
Remote sensor
To operate
the VCR
a Sony TV
Set
[TV]
/
[VIDEO]
to
[VIDEO]
and point at the remote sensor on the VCR
[TV]
and point at the remote sensor on the TV
continued
[TV]
/
[VIDEO]
This manual is related to the following products: