Sony SLV-E180EG User Manual
Page 36
Additional Operations
35
To stop editing
Press the
p
STOP buttons on both VCRs.
Tips
• To edit more precisely, press the
P
PAUSE buttons on the VCRs to release pause.
• To cut out unwanted scenes while editing, press
P
PAUSE on this VCR when an
unwanted scene begins. When it ends, press
P
PAUSE again to resume recording
(Assemble Editing).
Note
• If you start recording following the procedure above, the VCR won’t start recording
with the OPC function. To record a tape with the OPC function, press
r
REC again
during recording pause in step 3 so that the VCR analyses the tape. Then, when you
start editing in step 4, press
P
PAUSE after the OPC indicator stops flashing. If you
press
P
PAUSE before the OPC indicator stops flashing, the OPC function is
cancelled.