Step 4 – Spirit XT385 User Manual
Page 13
XT385/XT485
12
3. Connect all of the connectors from the console to the mating connectors at the top of the
upright tubes. There should be three connectors on the right side and one connector on the
left side.
STEP 4
1. Install the outside pieces of the console end caps with six 3.5mm x 25mm Phillips head
Screws (135) and install the plastic plugs (146) into the end caps. (Be careful not to cut or
pinch the wires.)
This manual is related to the following products:
See also other documents in the category Spirit Sports and recreation:
- Esprit ET2 (28 pages)
- XT200 (12 pages)
- ZE501 (14 pages)
- Z700 (7 pages)
- XU875 (35 pages)
- EL1 (22 pages)
- Z8 (1 page)
- XT 800 (15 pages)
- ZE20 (15 pages)
- Z300 (22 pages)
- CR800 (35 pages)
- XT685 (38 pages)
- XT2751 (28 pages)
- CT 800 (25 pages)
- Z700 (28 pages)
- XE 125 (16 pages)
- XE 100 (45 pages)
- XT385 (32 pages)
- XG400 (28 pages)
- Esprit ET10 (27 pages)
- Z900 (24 pages)
- XT101 (27 pages)
- XT375 (33 pages)
- XE150 (35 pages)
- IN300T (18 pages)
- XE395 (32 pages)
- XT600 (39 pages)
- EL 5 Elliptical (39 pages)
- XT485 (35 pages)
- XE700 (31 pages)
- XT285 (29 pages)
- 7300 (12 pages)
- XBR25 (34 pages)
- ZE40 (17 pages)
- XBR55 (30 pages)
- XE400 (29 pages)
- XT185 (27 pages)
- xt9 (19 pages)
- IN839 (16 pages)
- XE 850 (29 pages)
- XE295 (30 pages)
- XT475 (33 pages)
- EL255 (20 pages)