beautypg.com

Factory default passwords – Sharp MX-4100N User Manual

Page 22

background image

20

TO THE ADMINISTRATOR OF THE
MACHINE

(Separate this page from the manual and keep it in a safe place.)

Factory default passwords

When accessing the system settings, the administrator password is required to log in with administrator
rights. The system settings can be configured in the Web pages as well as on the operation panel. To
access the system settings using the Web pages, a password is also required.

Factory default administrator password

Store a new administrator password as soon as the machine is installed.
Once the administrator password has been changed, the new password is required to restore the factory
default password. Take care to remember the new password.

Factory default passwords (Web pages)

There are two factory default accounts: "Administrator" and "User". A person who logs in as an
"Administrator" can configure all settings in the Web pages. In addition, an administrator can restrict access
to other settings by enabling "User" accounts.
The factory default passwords are shown below.

Forwarding all transmitted and received data to the administrator
(document administration function)

This function is used to forward all data transmitted and received by the machine to a specified destination
(Scan to E-mail address, Scan to FTP destination, Scan to Network Folder destination, or Scan to Desktop
destination).
This function can be used by the administrator of the machine to archive all transmitted and received data.
To configure the document administration settings, click [Application Settings] and then [Document
Administration Function] in the Web page menu. (Administrator rights are required.)

Factory default setting: admin

Factory default account

Factory default password

User

users

users

Administrator

admin

admin

Note:

• The format, exposure, and resolution settings of transmitted and received data remain in effect when the data is

forwarded.

• When forwarding is enabled for data sent in fax mode,

• The [Direct TX] key does not appear in the touch panel.
• Quick online transmission and dialing using the speaker cannot be used.

mx5001_us_saf.fm 20 ページ 2008年9月24日 水曜日 午前9時45分

This manual is related to the following products: