Sharp MX-4100N - Manual (Page 14)

12
SPECIFICATIONS
Finisher specifications
*1 The maximum number of sheets that can be held varies depending on ambient conditions in the installation location, the type of
paper, and the storage conditions of the paper.
*2 Up to 10 envelopes can be output.
*3 The height of the sheets must not exceed 2-51/64" (71 mm).
*4 The height of the sheets must not exceed 1-13/32" (35.5 mm).
*5 The maximum number of sheets for stapling assumes a paper weight of 24 lbs. (90 g/m
2 ) and includes two cover sheets of 28 lbs.
bond to 140 lbs. index (106 g/m 2 to 256 g/m 2 ).
Model MX-FNX9
Paper sizes
12" x 18", 11" x 17", 8-1/2" x 14", 8-1/2" x 13-1/2", 8-1/2" x 13-2/5", 8-1/2" x 13", 8-1/2" x 11",
8-1/2" x 11"R, 7-1/4" x 10-1/2"R, 5-1/2" x 8-1/2"R, envelopes, A3W, A3, B4, A4, A4R, B5, B5R,
A5R, 8K, 16K, 16KR
Paper weight
Thin paper (15 lbs. to 16 lbs. (55 g/m 2 to 59 g/m 2 )) plain paper (16 lbs. to 28 lbs. (60 g/m 2 to 105 g/m 2 ))
heavy paper (28 lbs. bond to 140 lbs. index (106 g/m 2 to 256 g/m 2 )) , envelopes (20 lbs. to 24 lbs.
(75 g/m 2 to 90 g/m 2 ))
Modes Non-staple, staple
Allowed paper sizes for
offset 11" x 17", 8-1/2" x 14", 8-1/2" x 13-1/2", 8-1/2" x 13-2/5", 8-1/2" x 13", 8-1/2" x 11", 8-1/2" x 11"R,
A3, B4, A4, A4R, B5, 8K, 16K
Offset distance 1-3/16" (30 mm)
Tray capacity* 1
Non-stapling* 2 :
500 sheets* 3 (8-1/2" x 11", 8-1/2" x 11"R,
7-1/4" x 10-1/2"R, 5-1/2" x 8-1/2"R, A4, A4R, B5,
B5R, A5R, 16K, 16KR)
250 sheets*
4 (12" x 18", 11" x 17", 8-1/2" x 14",
8-1/2" x 13-1/2", 8-1/2" x 13-2/5", 8-1/2" x 13",
A3W, A3, B4, 8K)
Stapling* 5 :
30 sets or 500 sheets* 3 (8-1/2" x 11",
8-1/2" x 11"R, A4, A4R, B5, 16K, 16KR)
30 sets or 250 sheets*
4 (11" x 17", 8-1/2" x 14",
8-1/2" x 13-1/2", 8-1/2" x 13-2/5", 8-1/2" x 13",
A3, B4, 8K)
Power supply Supplied from the machine
Dimensions
25-3/16" (W) x 23-27/64" (D) x 8-5/64" (H) (640 mm (W) x 595 mm (D) x 205 mm (H))
(When tray is extended)
Weight Approx. 28.7 lbs. (13 kg)
Stapler section
Allowed paper sizes for
stapling
11" x 17", 8-1/2" x 14", 8-1/2" x 13-1/2", 8-1/2" x 13-2/5", 8-1/2" x 13", 8-1/2" x 11", 8-1/2" x 11"R,
A3, B4, A4, A4R, B5, 8K, 16K, 16KR
(Three stapling positions: one staple at bottom left corner, one staple at top left corner, and two
staples.)
Maximum number of
sheets for stapling*
5
50 sheets (8-1/2" x 11", 8-1/2" x 11"R, A4, A4R, B5, 16K, 16KR)
30 sheets (11" x 17", 8-1/2" x 14", 8-1/2" x 13-1/2", 8-1/2" x 13-2/5", 8-1/2" x 13", A3, B4, 8K)
(30 sheets when the sheets are the same width but different lengths.)
Note:
Special media such as transparency film and label sheets cannot be stapled or punched.
mx5001_us_saf.fm 12 ページ ２００８年９月２４日 水曜日 午前９時４５分