Samsung Digimax S500 - Manual (Page 39)

Messages
72
Settings (Menu 1.6)
Via this menu, you can set up default SMS
information.The following options are available:
Service centre: allows you to store or change the
number of your SMS centre required when sending
messages. You must obtain this number from your
service provider.
Validity period: allows you to set the length of
time your messages are stored at the message
centre while attempts are made to deliver them.
Message type: allows you to set the message type
to Text, Fax, Voice, ERMES, X400, or E-Mail. The
network can convert the messages into the selected
format.
Common: the following options are available:
Reply path: allows the recipient of your SMS
message to send you a reply via your message
centre, if the service is provided by the network.
Delivery report: allows you to set on or off. When
this function is set to on, the network informs you
whether or not your message has been delivered.
Memory Status (Menu 1.7)
You can check the number of SMS or EMS used,
followed by the available capacity of phone and SIM
memory.
Messages
73
Delete All (Menu 1.8)
You can delete all messages stored in the SIM card
and phone memories in this menu.
1. Scroll to a message box and place a check mark
ahead it by pressing the Select soft key.
Selecting All places check marks on all of the
message boxes.
2. If necessary, repeat Step 1 to check another
box.
3. When you have finished checking, press the Ok
soft key.
4. When a confirming message appears, press the
Yes soft key to delete all of the messages in the
box(es).
Otherwise, press the No soft key.
Broadcast (Menu 1.9)
This network service allows you to receive text
messages on various topics, such as the weather or
traffic. Messages are displayed immediately as they
are received, provided that:
• the phone is in Idle Mode
• the Receive option is set to On
• the message channel is currently active on the
channel list
When you get broadcast messages, you can see the
messages in Idle Mode. If it is short you can see the
display, otherwise, press the New CB soft key to
read the message.