Checking or changing programmed tracks, Searching for and storing the radio stations – Samsung MAX-B450 User Manual
Page 13
GB
13
You can check or change your selection of tracks at any time.
Press
once if you have started listening to the selection.
Press Program.
Result: The following indications appear:
(CH = Check, 01=Program No, DI = Disc No, – – = Track No on the disc)
If you have already programmed 24 tracks,
CH
is displayed
instead of
PR
when you press Program.
Press Program again.
Result: The first track selected is displayed, together with the letter
CH
(Change).
Press Program one or more times until the track to be changed is
displayed.
If necessary, press the corresponding Disc (1, 2, 3) button to change
discs.
Press
/
to select a different track.
Press Program to confirm your change.
Press CD (
) to start listening to the selection.
Result: The first track selected is played.
You can store up to:
15 FM stations or
15 FM stations
5 MW stations
15 AM stations
5 SW1 stations
5 SW2 stations
Switch the system on by pressing Standby/on.
Select the TUNER function by pressing TUNER .
Select the required frequency band by pressing TUNER (Band)
again on the front panel or TUNER (Band) on the remote control.
Result: The appropriate indication is displayed:
FM
Frequency Modulation
AM(MW)
Medium Wave
SW1(Option)
Short Wave
SW2(Option)
Short Wave
To search for a
Press Tuning Mode on the remote
station...
control
Manually
One or more times until
MANUAL
is displayed.
Preset
One or more times until
PRESET
is displayed.
Select the station to be stored by:
Press the
and
to increase or decrease the frequency
respectively
or
Pressing Tuning
or
on the remote control
To scroll through the frequencies faster when searching manu-
ally, hold down the
Tuning Down or Up
buttons.
The automatic search procedure may stop on a frequency that
does not correspond to a radio station. If this happens, use the
manual search mode.
Adjust the volume by:
Turning the Volume knob on the front panel
or
Pressing the VOL. + or – buttons on the remote control
Select the FM stereo or mono mode by pressing Mono/ST. on the
remote control.
Checking or Changing Programmed
Tracks
1
2
3
4
5
6
7
8
Searching for and Storing the Radio
Stations
1
2
3
4
5
6
7
2,3,4,7
8
5
5
5
4
1
7
6
6
2,3,4,7
8
1
6
6
1
5
2,3
6
MAX-B420/B450GB no rds-1~14 1 5/16/02 11:11 PM Page 13