StarTech.com ST7202USB - Manual (Page 5)

Instruction Manual
2
IIn ns stta alllla attiio on n
Windows 98SE
1. Windows will launch the Add New Hardware Wizard. Press Next to begin the
software installation process.
2. When the Add New Hardware Wizard
appears, click Next:
3. Windows will inform you that it is ready to
install the driver for the device Generic
USB Hub on USB 2.0 Bus. Click Next:
4. Follow any remaining prompts. When Windows informs you it has finished installing
the drivers. Click Finish.
5. To verify that the drivers have successfully been
installed, right-click on My Computer and select
Manage. Select Device Manager, and click on
the [+] symbol located next to
Universal Serial
Bus Controllers. Here, you should notice a listing
for Generic USB Hub on USB 2.0 Bus:
6. You can now attach USB devices to the hub.
To begin the installation process, connect the USB 2.0 Hub to an available USB 2.0 port.
Software installation will commence as follows: