Smeg SA682X - Manual (Page 9)

User instructions
32
TABLE FOR CERTIFICATION BODIES
Reference standard EN 50242
Reference program Selector on 3 + ECO 55°C button
Load 12 place-settings
Type of detergent B
Amount of detergent 30 g
Rinse aid setting Depending on the model 3/4 or 4/6
EN 50242
3.2 Washing programs
Before starting a washing program make sure that:
• The water supply tap is open.
• The correct amount of detergent has been added to the dispenser.
• The baskets have been correctly loaded.
• The spray arms are able to rotate freely and without obstruction.
• The dishwasher door is securely closed.
HALF LOAD WASH SETTING
This function is especially suitable for loads up to 6 place settings and allows saving of water and
electricity. It is controlled by the HALF LOAD button (4) and allows washing in the upper basket
only.
IMPORTANT: at the end of the program remember to deactivate the function to ensure the next
wash is not also carried out in half load mode by mistake.