Smeg SA682X - Manual (Page 7)

User instructions
30
3. Description of the controls
3.1 Front panel
All the dishwasher controls are grouped on the front panel.
1 WASHING PROGRAM SELECTOR
2 45°C-55°C-65°C SUPER-RAPID-SWITCH
3 ON/OFF BUTTON
4 ½ LOAD WASH BUTTON
5 POWER ON LIGHT
6 SALT WARNING LIGHT (HEATING ELEMENT “RUNNING” INDICATOR for models without water
softener)
7 RINSE AID WARNING LIGHT
8 RECESSED DOOR HANDLE
SETTING THE WASHING PROGRAM
To select the most suitable washing program, refer to the table below which indicates the
recommended washing according to dish type and the degree of soiling.
After using the table to identify the most appropriate washing program, turn the PROGRAM
SELECTION knob (1) to set the program of choice by aligning the pointer with the program
number.
If necessary, according to the program chosen, either select one of the functions enabled by the
SELECTOR SWITCH (2) or the ½ LOAD function using the special button (4).
Now simply pressing the ON/OFF key (3) will start the program. The PILOT LIGHT (5) lights up.