SWR Sound 2004 - Manual (Page 2)

2 • WORKINGMAN’S 2004
INTRODUCTION
Founded in 1984, SWR specializes in quality amplifiers and speakers addressing the needs of the professional and semi-profes-
sional bassist. Widely known as the makers of the finest bass systems in the world, SWR has recently gained popularity among
instrumentalists of all types, stemming from the introduction of a series of products intended for the acoustic musician. SWR and
its advisory board, consisting of some of the world's finest musicians, have constantly strived to identify the changing needs of
musicians everywhere, and to respond with new and useful designs, each one unique unto itself.
Numerous requests from our customers to produce a line of products that would incorporate accurate sound, high reliability, quali-
ty components, hand-made craftsmanship, and an overall low price, resulted in the development of the Workingman's Series of
amplification from SWR.
The precision electronic section featured in the Workingman's Series of amplifiers is entirely hand-built, employing a variety of
technologies selected for their sound quality and practical usefulness in a roadworthy and studio-ready amplifier, including an all-
discrete initial gain stage in the preamplifier section and discrete solid-state design in the power amplifier. Regardless of its lower
price, the Workingman's Series offers no compromises of the essential SWR design and construction philosophy. Corners are not
cut from a more elaborate model: rather, each product's design parameters are conceived from the ground up and the best avail-
able components are selected for each application. Once again, with sound, reliability and price consciousness in mind.
The tone-shaping section of all Workingman's Series amplifiers, including the Aural Enhancer (found in all SWR Preamps and
Integrated Amplifiers) and the Tone Controls, will not impose a character on your sound. They will instead make the interface
between your instrument and the speaker system (two of the largest factors in your final tone) a simple matter requiring minimal
effort. The center frequencies of the Tone Controls were chosen for their musical effect on most basses.
SWR amplification is handmade and individually tested in the United States. Everyone at SWR sincerely hopes that you are satisfied
with your recent purchase, as we are extremely proud of the quality and attention that goes into each and every SWR product. We
truly hope that your purchase of an SWR helps bring out the best in your playing and adds to your enjoyment of music.
WORKINGMAN'S 2004 - POWER SPECIFICATIONS
200 watts @ 4 ohms
160 watts @ 8 ohms
Minimum Impedance: 4 ohms
WORKINGMAN'S 2004 - RACK CASE ENCLOSURE
The Workingman's 2004 comes enclosed in a sturdy, custom fitted rack, covered in midnight blue carpet with stack lock corners.
The rack case was designed specifically to house the Workingman's 2004 chassis and features a single open rack space (directly
below the amplifier) for mounting the effect unit of your choice. Most single rack space effect units or digital tuners on the market
today will mount
perfectly into this space.
Dimensions: 23.25" W x 7.5" H x 13.5" D
Weight: 19 lbs.