Sony XR-CA440X - Manual (Page 11)

11
Other Functions
Adjusting the sound
characteristics
You can adjust the bass, treble, balance, and
fader.
1
Select the item you want to adjust by
pressing
(SEL) repeatedly.
Each time you press (SEL), the item changes
as follows:
BAS (bass) t TRE (treble) t BAL (left-
right) t FAD (front-rear)
2
Adjust the selected item by pressing
either side of
(VOL) .
Note
Adjust within 3 seconds after selecting the item.
Quickly attenuating the
sound
Press (ATT) .
After “ATT-ON” momentarily appears, the
“ATT” appears in the display.
To restore the previous volume level, press
(ATT) again.
Changing the sound and
display settings
— Menu
The following items can be set:
SET (Set Up)
• A.SCRL (Auto Scroll)* (page 13).
• M.DSPL (Motion Display)
– the demonstration mode which appears when
the tape is ejected and no source is selected
(e.g., tuner is turned off).
• BEEP — to turn the beeps on or off.
Selecting the desired item
Press (SEL) and the desired preset
number button simultaneously.
(SEL) + (3) : A.SCRL *
(SEL) + (4) : M.DSPL
(SEL) + (6) : BEEP
* When no CD or MD is playing, this item will not
appear.
After the mode setting completed, the display
returns to normal play mode.
Note
The displayed item will differ depending on the source.
To cancel the item, press (SEL) and the preset
number button simultaneously again.