Sony VGC-LT30 Series User Manual
Page 99
99
Using Your VAIO Computer
To connect to a wireless network
✍
You need to remove the back panel cover from the computer to access the WLAN switch. See Removing and Replacing the Back Panel Cover
for the procedure.
1
Make sure an access point is set up.
See the manual that came with your access point for more information.
2
Turn on the WLAN switch.
3
Click Start, All Programs, and VAIO Control Center.
4
Double-click Network Connections and VAIO Smart Network.
✍
For information on the VAIO Smart Network software, see the help file on the software.
5
Click the button next to or above your desired wireless option(s).
Make sure the Wireless LAN indicator is lit.
6
Right-click
or
on the taskbar and select Connect to a network.
7
Select the desired access point and click Connect.
✍
For WPA-PSK or WPA2-PSK authentication, you must enter a passphrase. The passphrase is case sensitive and must be between 8 and 63
alphanumeric characters long or up to 64 characters long using numbers from 0 to 9 and letters from A to F.